PT. Cipta Aneka Air

C-PURE CARTRIDGE FILTER
C-PURE HOUSING FILTER

C-PURE PLEATED FILTER

C-PURE PLEATED FILTER

are constructed with all polypropylene materials C-Pure pleated filter series do not contain any adhesives or additive sand are highly recommended into the high purity applications.

Specification

MATERIAL	POLYPROPYLENE
Gasket	O-Rings Buna-N,EPR,Silicone,Viton, Teflon Encapsulated Viton (O-Rings Only).
Micron Ratings	0.2, 0.45, 0.65, 1, 3, 5, 10, 20, 40 μm

Dimension and Operating Parameters

Nominal Length	10” 20” 30” 40” (25.4) (50.8) (76.2) (101.6 cm)
Outside Diameter	2,7” (6.86 cm)
Inside Diameter	1,0” (2.54 cm)
Max Operating Temprature	178 F (80 C)
Max Differential Pressure	80 psid @ 70 F (5.5 bars @ 21 C) O O 40 psid @ 176 F (2.8 bars @ 80 C)
Recomended Change - out	35 psid (2.4 bar)

Filter Removal Effeciency

Effeciency	90%	90%

Polypropylene

0.2 Micron	1.0	0.2
0.45 Micron	2.0	0.4
0.6 Micron	3.0	0.60
1.0 Micron	6.0	1.0
3.0 Micron	14.0	3.0
5.0 Micron	17.0	5.0
10.0 Micron	25.0	10.0
20.0 Micron	40.0	20.0
60.0 Micron	60.0	40.0

Features and Benefits

Wide Chemical Compatibility PolypropylenePleated Cartridge.

High Flow rates and Dirt Holding Capacity.
Non-Fiber Releasing.
100% Polypropylene Construction, Suitable for :
Filtration of wide range aggressive Chemicals and solvents.
All Polypropylene Parts, Polypropylene SupportLayer/Thermal Welding to Minimize
Extractable.
All Materials are FDA Listed for Contact with Food And Beverages.
Cartridge could be Rinse-Up to 18 Mega Ohm-cm in a Few Minutes.

Applications

Food And Beverages Ultrapure Water Cosmetics Photo Resist Aqueous Solutions	RO Filter Ink Pharmaceutical Chemicals De Trap

CPFS Ordering Details

Type	Micron Rating	END Modification	O-RING/GASKET MATERIAL	CARTRIDGE LENGTH
CPF	0.2, 0.45, 0.60, 1, 3, 5, 10, 20,40	D - DOE	E - EPDM V - VITON S - SILICONE F - TEFLON	10” 20” 30” 40”
		F - SOE 222 O-RING FLAT
		E - SOE 226 O-RING FLAT
		C - SOE 222 O-RING BAYONET
		B - SOE 226 O-RING BAYONET

Design with the graded density for structure to increase dirt holding capacity and filteration efficiency. Easy and safe in cinerate and to dispose. proprietary centre core for providing greater strength.

Specification

Retentions Ratings

0.5,1,3,5,10,25,50,75 um Nominal

Operating Conditions

Max Operating Temprature	60
Max Change out Differential Pressure	35 psid (2.41 bar)

Material Of Construction

Filter Media	60
Centre Core	35 psid (2.41 bar)
O-RING	EPDM, VITON, SILICONE

Dimension

Length	10" - 40"
Inner Diameter	28 mm
Outer Diameter	62 mm

Application

Food and Beverage Industry Wine, Portable Water, Beer, SoftDrink, SugarLiquid, Edible Oils. Chemical Industry Paint, Ink, Magnetic Paint, OilResin, Metal working. General Process Industry LCD Chemical Liquid,Plating Liquid, Pre-Filtration for RO/ UF, PureWater, Resin Trap and Any Kinds of Water Treatment.

Features and Benefits

High Quality Polypropylene Advanced Super Meltblown Filter Cartridge with Independent Center Core.

Graded Pore Structure Increases Dirt Holding.

Capacity and Filtration Efficiency.
Easy and Safe to Incinerate and to Dispose.
100% Polypropylene Construction.
No Surfactant, Binder and Adhesives.
All Materials Meet FDA Requirements for Food and Beverage.
Provide a Wide Range of Filtration Apllications from 0.5 to 75µm.
Proprietary Center Core for Greater Strength.

CMF - Series Ordering Guide

Type	Micron Rating	END Modification	O-RING/GASKET MATERIAL	CARTRIDGE LENGTH
CMF	0.5,1,3,5,10,25,50,75	D - DOE F - SOE 222 O-RING FLAT E - SOE 226 O-RING FLAT C - SOE 222 O-RING BAYONET B - SOE 226 O-RING BAYONET	E - EPDM V - VITON S - SILICONE F - TEFLON	10" 20" 30" 40"

C-PURE GENERAL FILTER HOUSING

C-PURE GENERAL FILTER HOUSING
General Filter Housings Flexibility in a Wide Range of Applications.

150 psig Maximum Operating Pressure Permits Use In a Wide Range of Application.
Housing Accepts Seven – 10”, 20”, 30”, 40”Cartridges Allowing Optimum System Design.
304 or 316 Stainles Steel Materials ofConstruction for Maximum Corrosion Resistance.
Optional Electropolish Finish is Available.
Operator Friendly V-Clamp Closure AllowsQuick and Easy Cartridge Change Out.
3,5,7,9, and 12 Round Models are Also Available.

Maximum Operating Pressure.
150 psig (10.3 bar) @ 200 OF (93 OC) In Liquid Service
( C-Pure General Filter Housings Series not Recommended for Gas Service )

Specification

MATERIAL OF CONSTRUCTION

Head	SS 304, SS 316
Seal	SS 304, SS316
Vent Cap	SS 304, SS316
Bottom Seat Plate	SS 304, SS316
Internal Components	SS 304, SS316
Shells O-Rings	Standart : EPDM Optional : Viton, Teflon Encapsulated Viton, Silicone

CONNECTIONS

Inlet/Outlet	1.5”-3” (48.3 - 88.9 mm) NPT, ANSI (Flange)
Vent	1/4” (13.7 mm) NPT
Drain	3,4” (26.7 mm) NPT
Optional Operations	JIS, DIN Flanged, PT, BSP

Dimensional Data

Ordering Information

C-PURE SANITARY FILTER HOUSING

C-PURE SANITARY SINGLE FILTER HOUSINGS
Filter housings have special surface finish of mechanical polish, making the housings ideal choices for demanding processes requiring high purity. The smooth surface retains the lowest content of fine dust in fluid and liminates possible contaminants while processing. With features of easy draining and clamp closure, the housings are advantaged of convenient operation and quick element change out.

OPERATING DATA

Maximum Operating Temprature.	75 C (167 F) (Base on selection of filter element and O-ring material
Maximum Operating Pressure.	7 bar at 75 C (100 psi at 167 F)

Application

Pre-RO/DI Laboratory Facilities Chemicals Electronics	Food & Beverages Pharmaceuticals Process Gases

ORDERING INFORMATION

COMPONENTS

DIMENSIONS

C-PURE SANITARY MULTIFILTER HOUSING

C-PURE SANITARY MULTI FILTER HOUSINGS
Filter housings have special surface finish of mechanical polish.The design of clamp closure advantages the housings withconvenient operating and quick element change out andthe housings can be disassembled in all parts, eliminatingpossibility of retained particles and making more.effective cleaning.

OPERATING DATA

Maximum Operating Temprature.	75 C (167 F) (Base on selection of filter element and O-ring material
Maximum Operating Pressure.	7 bar at 75 C (100 psi at 167 F)

Application