PT. Cipta Aneka Air

pt cipta aneka air

Judul Page

Deskripsi Page


Deskripsi Chemcon

Judul Deskripsi Chemcon 01

Deskripsi Chemcon

Judul Deskripsi Chemcon 02

Deskripsi Chemcon

Judul Deskripsi Chemcon 03

Deskripsi Chemcon 03

Judul Deskripsi Chemcon 20

Deskripsi Chemcon Chemcon 20

Judul Deskripsi Chemcon 21

Deskripsi Chemcon Chemcon 21

Judul Deskripsi Chemcon 30

Deskripsi Chemcon Chemcon 30

Judul Deskripsi Chemcon 31

Deskripsi Chemcon Chemcon 31

Judul Deskripsi Chemcon 32

Deskripsi Chemcon Chemcon 32

Judul Deskripsi Chemcon 40

Deskripsi Chemcon Chemcon 40

Judul Deskripsi Chemcon 50

Deskripsi Chemcon Chemcon 50

Judul Deskripsi Chemcon 60

Deskripsi Chemcon Chemcon 60

Judul Deskripsi Chemcon 61

Deskripsi Chemcon Chemcon 61

Judul Deskripsi Chemcon 601

Deskripsi Chemcon Chemcon 601

Judul Deskripsi Chemcon 30

Deskripsi Chemcon Chemcon 30

Judul Deskripsi Chemcon 612

Deskripsi Chemcon Chemcon 612

Judul Deskripsi Chemcon 613

Deskripsi Chemcon Chemcon 613

Judul Deskripsi Chemcon 614

Deskripsi Chemcon Chemcon 614

Judul Deskripsi Chemcon 65

Deskripsi Chemcon Chemcon 65

Judul Deskripsi Chemcon 65

Deskripsi Chemcon Chemcon 65

Judul Deskripsi Chemcon 65

Deskripsi Chemcon Chemcon 65

Judul Deskripsi Chemcon 65

Deskripsi Chemcon Chemcon 65


Deskripis C-PURE.






Deskrispi C-PURE General Filter Housing



Membrane System

CAA create a membrane system that is great for filtering unwanted particles in the water Common membrane processes include ultrafiltration (UF), reverse osmosis (RO), electrodialysis (ED), and electrodialysis reversal (EDR).

These processes (with the exception of UF) reduce most ions, RO and UF systems also provide efficient reduction of nonionized organics and particulates. Because UF membrane porosity is too large for ion rejection, the UF process is used to reduce contaminants, such as oil and grease, and suspended solids.

Brackish water are any water sources with TDS between 1000 and 15 000 mg/L. Brackish water cannot be consumed by us directly due to its high salinity. According to World Health Organization (WHO), water with salinity below 500 mg/L is acceptable as drinking water.

There are quite a large number of research that had been done on BWRO. Each of them has agreed with a common design on optimum BWRO design with a slight modification in order to improve more and make a better BWRO system. BWRO systems which have been tested in real situation agree that the single stage system with module connected to reject water is the most optimum system both economically and environmentally.

There is some improvement done to the design by using SWRO membrane at the second stage. This improvement increases recovery rate to about 83% and reduces boron concentration at the same time. Another design is by using hybrid combination of ultra-low and conventional RO membranes.

Hybrid improves permeate quality. It is also possible to create a hybrid array by mixing membrane element types within a pressure vessel itself. Co-operating an efficient module arrangement into a complete BWRO system will reduce energy consumption. Energy-recovery device is a component that must be included in any small or large-scale systems.

A small-scale RO system, without energy recovery, would typically consume two to three times more energy. This will be more for large-scale systems. While single stage system with module connected to reject water is preferred by researchers who have done real environment testing, simulation prefers to add another membrane to the reject water of the second module. This system is yet to be tested in real environment to prove its standing.

Sea Water Reverse Osmosis Systems (Desalination) are essential systems to supply fresh water in cases that available fresh water resources are insufficient and utilization of sea water is inevitable (ships, apartment blocks, hotels, hospitals, holiday resorts, municipalities, industrial facilities, bottling facilities etc.).

Sea water, is collected in a raw water tank through open-intake or upon being naturally filtrated through a well opened on the shore Prior to introducing raw water in the reverse osmosis system, pre-treatment shall be carried out by passing it through an adequate filtering line consisting of a set of filters to protect the membranes and extending their lives.

Additionally, dosages of antiscalants shall be applied to water before membrane to prevent sedimentation of ions and minerals and adhesion of acid, ion and minerals. Thus, performance of membranes are kept at the optimum level. pH balancing and corrosion preventing chemical dosing are carried out at system output when required. The system is controlled by a PLC that is designed to control all equipment and does not require human intervention.

CAA Ultra-filtration (UF) is a membrane separation process that allows small molecules to pass through the membrane while retains large molecules, colloidal substances or particles.

UF membrane technology is currently used in a great deal in water purification, where water and dissolved minerals, small organic molecules may pass through the membrane and most of the other contaminants including bacteria, virus, most of colloidal substances and suspended solid are removed from the treated water. This process is widely used in pre-treatment for reverse osmosis (ROl, fordrinking water treatment and for water recycling.

UF technology also plays a key role in the clarification of liquor and drinks, in the removal of indotoxins from drug solutions, and in the concentrating of drugs and chemicals.

EDI (Electro Deionization System)


Electrodeionization is a water treatment technology that utilizes electricity, ion exchange membranes and resin to deionize water and seperate dissolved ions from water;
CAA has been successfull at manufacturing a Hot Water Sanitizable EDI Water System with the capacity of 15.000L/Hour for Pharmaceutical Industry



The Purified Water Distribution System is a compact purified water distribution system for the distribution, Disinfection and monitoring of PW in accordance with the EP and USP

Process :

The pure water to be disinfectant flows through the ozone generation cell via a bypass line and is return to the loop via the return line. When the water flows through the ozone generation cell it absorbs ozone. The ozone with a concentration of 15 to 25 ppb provides systematic protection for the tand system.

The UV-unit if installed to destroy the ozone before the sterilized purified water flows into the main loop.This can reduce its concentration to below the detectable level.

The whole system which is used for production, distribution, Sterilization and Monitoring of the purified water is composes of C-Pure purified water equipment and Loop Purified Water distribution equipment. Otherwise, The Customers can select hot-water sanitazion of the whole roution and tank between 80 to 85'C


LOOP integrates its PW-WFI-PS Generation equipment with state-of-the-art distribution loops. Our Loop design is the result of a careful evaluation of Points of Use delivery criteria such as :

1. Maximum istantaneous flow rate.
2. Pressure & Temprature Requrements.
3. Sanitization issues.
4. Combination technology systems, RO/CEOI units (on one skid) Footprint savings.
5. Periodic consumption requirements and duration.
6. Method of delivery (automatic or manual).

Sewage Treatment Plant is a facility designed to receive the waste from domestic, commercial and industrial sources and to remove materials that damage water quality and compromise public health and safety when discharged into water receiving systems. Today, technological progress is increasingly broadening the range of possibilities offered by classic environmental protection. The ecological focus is on water protection and the multiple use of waste water.

Waste water after treatment through physical, chemical & biological processes can be further treated by tertiary treatment processes. The downstream treatment processes to effluent treatment system further decrease Suspended impurities, BOD (Biological Oxygen Demand), COD (Chemical Oxygen Demand), TOC(Total Organic Carbon) and Dissolved impurities beyond the regulatory discharge norms and make water suitable for various applications. The treated water can be recycled and reused for washing, cooling, horticulture process and numerous other applications. TEIL has the distinction of having designed, supplied and installed large number of successfully operating recycle plants in India. We offer a wide range of technologies to provide complete solutions for recycle, reuse & ZLD (Zero Liquid Discharge).

Membrane bioreactor (MBR) is the combination of a membrane process like microfiltration or ultrafiltration with a biological wastewater treatment process, the activated sludge process. It is now widely used for municipal and industrial wastewater treatment.

Bendera Indonesia Indonesia  |  Bendera Inggris English
Logo IDT